diy

inspiration

No sub-categories

recipes

smarty party ideas

smarty tips

wedding

bride & groom champagne flute diy

Learn how to make bride and groom champagne diy for your wedding toast! | SmartyHadAParty.com

Calling all wedding planners and DIY brides!

Itching to have the wedding champagne toast in style without that hefty price tag? You’re in luck! We have a fun, simple, and inexpensive, yes, inexpensive, bride and groom champagne flute DIY that is swoon worthy.

Here is what you need for the bride and groom champagne flute diy. | SmartyHadAParty.com

Yields: 10 champagne flute DIYs

Approximate cost per champagne flute DIY: $4.25

What you need:

Bride and Groom Champagne Flute Tutorial | SmartyHadAParty.com

The Groom:

Step 1: Wrap 3/8″ black grosgrain ribbon around the stem of the champagne flute and glue to hold in place.

Step 2: Wrap the 3/8″ white grosgrain ribbon around the top of the stem one time.

Step 3: Cut a piece of the 3/8″ black grosgrain ribbon approximately 2.5″ long and tie a knot in the middle – this is the groom’s bowtie.

Step 4: Glue the bow tie onto the 3/8″ white grosgrain ribbon at the top of the champagne glass stem.

Step 5: Cut a 2.5″ piece of the 3/8″ white grosgrain ribbon.

Step 6: Cut three individual rhinestones off of the silver diamond mesh and glue them onto the 2.5″ piece of the white 3/8″ grosgrain ribbon.

Step 7: Glue the 2.5″ piece of the white 3/8″ grosgrain ribbon with rhinestones vertically onto the champagne glass (directly under the bow tie).

Step 8: Cut a 4″ piece of the 3/8″ red grosgrain ribbon.

Step 9: Fold the piece of red ribbon at a 90-degree angle so that about a 1/2″ of the ribbon is hanging down.

Step 10: Roll the rest of the ribbon.

Step 11: Glue 3/8″ red grosgrain ribbon rose to champagne flute next to the white 3/8″ grosgrain ribbon with silver diamond mesh.

The Bride:

Step 1: Wrap 3/8″ white grosgrain ribbon around the stem of the champagne flute.

Step 2: Cut strips of the silver diamond mesh, wrap, and glue them to the top of the champagne flute stem leaving a little semicircle in the front.

Step 3: Cut one piece of the silver diamond flower mesh and glue it in the center of the semicircle.

Step 4: Cut a piece of white tulle that is approximately 4″ long and tie it in a knot around the base of the champagne flute.

Step 5: Cut 4″ pieces of white tulle and glue them to the tulle circle. Repeat until you have a nice thick “skirt / dress.”

Step 6: Cheers!

Looking for a great recipe to toast with? Try one of these signature wedding cocktails.

Want Smartyware® to match these bride & groom champagne flutes? Shop Victoria.

Party Seriously, Smarties!

Jackie

Styling: Teresa Dennis & Kenwin JonesSubscribe to our email newsletters here.